I’m going to show you how to re-fill your electronic cigarette atomizer A.K.A an tankomizer. So let’s begin by talking about the actual e cigarette clearomizer. If you look on top of the electronic cig cartomizer you’ll see a silicon bun. There’s a small hole underneath the coil. This is the hole that is going to be used to fill the electric cigarette clearomizer up, using a blunt needle on the filling bottle behind. There is a tiny hole & you can notice half way down. It was punchered using the blunt needles.
What we’re going to do is get this needle off of the filling bottle & choose your E juice, take the lid off of your E juice. Simply remove the cap off of that. After you get the lid, screw the blunt filling on nice & tight to avoid any leaks.
The following step we want to get our electronic cig clearomizer and insert it steadily into the hole. You want to push through the silicone to make a hole to fill it in. After that, we just want to squeeze the E-juice bottle. Making sure that the E-juice runs in. The wick thats hanging down on both sides will absorb. This gets the E juice up into the coil then your vapor is produced by your electronic cigarette. That is very simple, poke the needle out. The silicone hole below the big hole at the top actually seals itself because it’s elastic. Some of these are supplies with a tiny rubber bun. If you can exchange them then go ahead and do it.
Then that’s how you refill your electronic cigarette tankomizer. Next, is to take the shielding sleeve over the tankomizer. You can see how much E juice you have left inside that tiny window. Then, you push that sleeve down firmly to hold it in its place. Thats it, your done.
Vapor Corp has in stock several differnet kinds of vapor cigarettes, disposable electronic cigarette, or electronic cigarette. Give us a call today at 1-888-766-5351…
